UNI-FI – TopEnd

ELAC Uni-Fi Reference UCR52

admin — Mon, 08 Nov 2021 08:46:28 +0000

Elac speakers Uni-Fi Reference series

The new Uni-Fi Reference Series establishes a level of performance and cosmetics not associated at this price point. Designed to blend with traditional or contemporary styles

Specification:

Speaker Type: 3-Way Bass Reflex
Frequency Response: 47Hz—35000Hz
Nominal Impedance: 6 Ohms
Sensitivity: 85db
Crossover Frequency: 240 / 1800Hz
Maximum Power Input: 140 Watts
Tweeter: 1″ Soft Dome
Midrange: 4″ Aluminum
Woofers: 2 x 5.25″ Aluminum
Cabinet: CARB2 Rated MDF
Cabinet Finish: Satin White with Oak Sides or Satin Black with Walnut Sides
Port: Dual Flared Slots
Binding Posts: Bi-Wire 5-Way

Full Perimeter Bracing

Reducing the speaker cabinets influence on the audio quality the Uni-Fi reference line implements full perimeter bracing significantly reducing cabinet vibration and cabinet coloration.

Dual Flared Slot Vents

Our newly developed slot vents utilized both internal and external flares allowing for lower noise and high bass output for improved low frequency dynamics.

New Concentric Driver with Cast Chassis

A wide-surround tweeter enhances it’s low and high frequency extension allowing for improved blending with the midrange.

An entirely new midrange driver with large diameter voicecoil, vented rear spider and new neodymium magnet allows for better excursion and control of midrange frequencies.

A new cast chassis was designed to minimize reflections back to the cone resulting in better clarity.

Newly developed 6.5-inch aluminum subwoofer

The newly developed one-piece aluminum membrane has better rigidity. Combined with an oversized magnet, large diameter voice coil, and extended pole piece, these changes result in improved accuracy and bass dynamics.

ELAC Uni-Fi REF UBR62

admin — Sun, 07 Nov 2021 17:22:19 +0000

Elac speakers Uni-Fi Reference series

The new Uni-Fi Reference Series establishes a level of performance and cosmetics not associated at this price point. Designed to blend with traditional or contemporary styles

Specification:

Speaker Type: 3-Way Bass Reflex
Frequency Response: 41Hz—35000Hz
Nominal Impedance: 6 Ohms
Sensitivity: 85db
Crossover Frequency: 260 / 1800Hz
Maximum Power Input: 140 Watts
Tweeter: 1″ Soft Dome
Midrange: 4″ Aluminum
Woofers: 6.5″” Aluminum
Cabinet: CARB2 Rated MDF
Cabinet Finish: Satin White with Oak Sides or Satin Black with Walnut Sides
Port: Dual Flared Slots
Binding Posts: Bi-Wire 5-Way

Highly reinforced cabinet

Reducing the speaker cabinets influence on the audio quality the Uni-Fi reference line implements full perimeter bracing significantly reducing cabinet vibration and cabinet coloration.

Dual Flared Slot Vents

Our newly developed slot vents utilized both internal and external flares allowing for lower noise and high bass output for improved low frequency dynamics.

New Concentric Driver with Cast Chassis

A wide-surround tweeter enhances it’s low and high frequency extension allowing for improved blending with the midrange.

An entirely new midrange driver with large diameter voicecoil, vented rear spider and new neodymium magnet allows for better excursion and control of midrange frequencies.

A new cast chassis was designed to minimize reflections back to the cone resulting in better clarity.

Newly developed 6.5-inch aluminum subwoofer

ELAC Uni-Fi Reference UFR52

admin — Sun, 07 Nov 2021 10:25:16 +0000

Elac speakers Uni-Fi Reference series

The new Uni-Fi Reference Series establishes a level of performance and cosmetics not associated at this price point. Designed to blend with traditional or contemporary styles

Specification:

Speaker type: 3-way bass reflex
Frequency range: 40Hz – 35000Hz
Nominal impedance: 6 Ohms
Sensitivity: 86 dB
Crossover frequency: 220/1800 Hz
Maximum power: 140 watts
Tweeter: 1 ″ Medium range: 4 ″ aluminum
Subwoofers: 3 x 5.25 ″ aluminum
Cabinet: MDF with CARB2 rating
Cabinet finish: satin white with oak sides or satin black with walnut sides
Port: Two expanded slots

Full Perimeter Bracing

Reducing the speaker cabinets influence on the audio quality the Uni-Fi reference line implements full perimeter bracing significantly reducing cabinet vibration and cabinet coloration.

Dual Flared Slot Vents

Our newly developed slot vents utilized both internal and external flares allowing for lower noise and high bass output for improved low frequency dynamics.

New Concentric Driver with Cast Chassis

A wide-surround tweeter enhances it’s low and high frequency extension allowing for improved blending with the midrange.

An entirely new midrange driver with large diameter voicecoil, vented rear spider and new neodymium magnet allows for better excursion and control of midrange frequencies.

A new cast chassis was designed to minimize reflections back to the cone resulting in better clarity.

Newly developed 5.25-inch aluminum subwoofer

ELAC Uni-Fi 2 UC52

admin — Sat, 06 Nov 2021 19:35:18 +0000

Second-generation Uni-Fi series center speaker

ELAC’s UC52 has the power and performance needed to anchor your home theater system’s front soundstage to the action on your TV’s screen. This is the speaker you’ll want to use if your left and right front speakers are the Uni-Fi 2.0 UB52 bookshelf or UF52 floor-standing speakers.

Specification:

Speaker type: 3-way, bass reflex
Tweeter: 1 x 1-inch soft dome, concentrically mounted
Midrange: 1 x 4-inch aluminum cone
Woofer: 2 x 5.25-inch aluminum cone
Crossover frequency: 200 / 2,000 Hz
Frequency response: 48 to 35,000 Hz
Sensitivity: 85 dB at 2.83 v/1m
Recommended amplifier power: 40 to 140 wpc
Peak power handling: 140 wpc
Nominal impedance: 6 Ω
Binding posts: 5-way custom
Magnetic shielding: No
Cabinet finishes: Black ash vinyl
Accessories included: Fabric grille

3-way speaker design

With separate tweeter, mid-range and bass drivers the Uni-Fi UB52 delivers clean bass without distorting vocals.

Robust cabinet

Every Uni-Fi 2.0 enclosure is engineered with thick MDF outer walls and a luxurious black ash vinyl finish.

Specially located internal bracing adds stiffness and strength to the cabinet’s outer walls, reducing the cabinet vibration that causes unwanted coloration.

Sophisticated 3-Way Crossover

An enhanced design improves response linearity, improves driver integration and delivers a true 6-ohm nominal impedance for compatibility with virtually all AV receivers.

Brand new customized concentric converter

The new wideband tweeter enhances the low and high frequency expansion, which it allows

finer blending with the medium converter. Brand new elements used to improve mid frequencies such as
larger diameter voice coil, new aluminum diaphragm, new low profile surround and
new neodymium magnet assembly.

New Single Piece Woofer

A newly developed single piece aluminum dished cone results in improved stiffness. Combined with an oversized magnet, large diameter voice coil, and extended pole piece, these changes result in improved accuracy and bass dynamics.

ELAC Uni-Fi 2 UB52

admin — Sat, 06 Nov 2021 18:29:10 +0000

Second-generation Uni-Fi series bookshelf speakers

ELAC’s original Uni-Fi bookshelf speakers set a high bar for performance and value, and they racked up lots of rave reviews from Crutchfield customers along the way. ELAC’s UB52 bookshelf pair — from the newly refreshed Uni-Fi 2.0 Series — promises an even better taste of the high-end audio experience, at a price point that’s more accessible than you might expect for speakers this good.

Specification:

Speaker type: 3-way, bass reflex
Tweeter: 1 x 1-inch soft dome, concentrically mounted
Midrange: 1 x 4-inch aluminum cone
Woofer: 1 x 5.25-inch aluminum cone
Crossover frequency: 200 / 2,000 Hz
Frequency response: 46 to 35,000 Hz
Sensitivity: 85 dB at 2.83 v/1m
Recommended amplifier power: 40 to 140 wpc
Peak power handling: 140 wpc
Nominal impedance: 6 Ω
Binding posts: 5-way custom
Magnetic shielding: No
Cabinet finishes: Black ash vinyl
Accessories included: Fabric grille

3-Way Speaker Design

With separate tweeter, mid-range and bass drivers the Uni-Fi UB52 delivers clean bass without distorting vocals.

Sophisticated 3-Way Crossover

An enhanced design improves response linearity, improves driver integration and delivers a true 6-ohm nominal impedance for compatibility with virtually all AV receivers.

Brand new customized concentric converter

The new wideband tweeter enhances the low and high frequency expansion, which it allows

Newly developed 5.25-inch aluminum subwoofer

Robust Cabinets

Every Uni-Fi 2.0 enclosure is engineered with thick MDF outer walls and a luxurious black ash vinyl finish.

Specially located internal bracing adds stiffness and strength to the cabinet’s outer walls, reducing the cabinet vibration that causes unwanted coloration.

ELAC Uni-Fi 2 UF52

admin — Sun, 06 Oct 2019 12:10:04 +0000

For larger environments or when you’re looking for greater bass dynamics, the UF52 with it’s multiple bass driver configuration will meet the needs of even the most demanding soundtracks or music. Using the same outstanding drivers and technology as the other models in the series ensures this compact, 3-way, bass-reflex floorstander delivers a matched sonic signature.

Specification:

Speaker type: 3-way, bass reflex
Tweeter: 1 x 1-inch soft dome, concentrically mounted
Midrange: 1 x 4-inch aluminum cone
Woofer: 3 x 5.25-inch aluminum cone
Crossover frequency: 200 / 2,000 Hz
Frequency response: 42 to 35,000 Hz
Sensitivity: 85 dB at 2.83 v/1m
Recommended amplifier power: 40 to 140 wpc
Peak power handling: 140 wpc
Nominal impedance: 6 Ω
Binding posts: 5-way custom
Magnetic shielding: No
Cabinet finishes: Black ash vinyl
Accessories included: Fabric grille

Improving upon the critically acclaimed Uni-Fi series, the Uni-Fi
2.0 incorporates numerous changes that elevate the performance
beyond the originals. In a complete redesign; from drivers to
crossovers to cabinets, this new series redefi nes what is possible
from a compact affordable loudspeaker

Brand New Custom-Designed Concentric Driver

A new wide-surround tweeter enhances it’s low and high frequency extension allowing for
improved blending with the midrange driver. An entirely new mid-range design features a
larger diameter voice coil, new aluminum cone profi le, new low-profi le surround, and an all-
new neodymium magnet assembly.

Newly Developed 5.25-inch Aluminum Woofer

A newly developed single piece aluminum dished cone results in improved stiffness.
Combined with an oversized magnet, large diameter voice coil, and extended pole piece,
these changes result in improved accuracy and bass dynamics.

Robust Cabinets

Every Uni-Fi 2.0 enclosure is engineered with thick MDF outer walls and a luxurious black
ash vinyl fi nish. Specially located internal bracing adds stiffness and strength to the cabinet’s
outer walls, reducing the cabinet vibration that causes unwanted coloration.